AccuFab FabCure Post-Processing Unit

FabCure 2 is recommended as the standard post-curing tool for Shining3D 3D printers. With FabCure 2, each resin cure profile is finely tuned to deliver the part's peak performance through precise heat and light. FabCure 2 precisely defines the post-processing steps of the printed object to ensure high precision and optimal material performance, while automating the process.

High Power Multi-Surface Light Curing

From the sides and bottom, 30 multi-directional LEDs emit powerful UV light that instantly penetrates deep into the part's surface, completely curing the printed object within a few minutes. With a power of 70W, these LEDs provide a high-power curing cycle, ensuring an efficient curing process.

Rapid Chamber Heating

The ceramic heating module is integrated with multiple temperature sensors. The chamber heats up quickly to 60 degrees, enhancing mechanical and flexural properties. The FabCure 2 heating system precisely controls ambient temperatures to 60 ℃.

Customized Curing Parameter

FabCure 2 provides optimal curing parameters for Shining3D resins, which can be updated via the wireless network. Customized curing parameter settings are supported.

Larger Curing Volume

A curing volume of up to Φ210mm and H180mm supports a wide range of dental appliances.

Smart Material Library

With the most up-to-date cloud-based smart material library, the FabCure 2 is always synchronized. The FabCure 2 is equipped with Wi-Fi, which enables online updates to deploy the latest firmware and configurations. 

Easy Operation with OLED Screen

The popular convenient control knob is integrated into an OLED screen enabling an interactive and convenient operation experience.